Descripción
Independent of the water tap, the automatic irrigation of planters can operate from a rainwater tank, for example.
Extendable system, if you need to connect more than 6m of planters. To save water, there is the possibility of connecting it to the electronic rain sensor, ref. 1189 or the humidity one, ref. 1188.
This kit includes: a transformer with timer to select the irrigation program, a 14 V low voltage pump with dirt filter, 25 linear drippers of approx. 2 l/h with 1 sealing plug, 10 m distribution tube 4.6 mm (3/16"), 15 tube supports.
CHARACTERISTICS
- Completely automatic: The irrigation of the planters can be regulated using the programmer and the water flow is automatically connected or disconnected. This system is very practical and gives you more free time.
- Irrigation according to needs: The wide selection of 14 irrigation programs allows optimal watering, depending on the requirements of the plants.
- Top product quality: GARDENA products made in Germany are of quality and high performance, reliable and with continuous innovation.
- Independent of the water intake: The automatic irrigation system for planters works independently of the tap, in any place where there is a water reserve, such as, for example, a rainwater tank and where there is an electricity supply.
- Ready to use immediately: Thanks to the complete programming set with pump included, this system can be used immediately.
Article number : 1407-20
INCLUDES
- Transformer
- Bomb
- 25 linear drippers approx. 2l/h with 1 closing cap
- 10 m distribution tube 4.6 mm (3/16")
- 15 tube supports.